You are not logged in.

#1 2010-08-01 14:59:54

cisca1953
Member
Registered: 2010-08-01
Posts: 1

Drawing buildings in Potlatch

I am a new user and bad-eyesighted, but i like to contribute to Streetmap as good as possible. I have a little problem with drawing buildings in Potlatch. When i draw the lines and connect them to make a closed loop a want to tag it as a building, but the menu's and listbox does not show "Building", only "Building site". How do i mark or construct a Building? It is a lot of trouble for me to look through manuals. I have to use a looking glass to read.

I need this information a little urgent because i have made a mistake in a map: a building is not a building anymore but a road. I want to correct it a.s.a.p.

Thanks,

Cisca

Offline

#2 2010-08-01 15:18:33

Vclaw
Member
From: Alba
Registered: 2009-02-25
Posts: 522
Website

Re: Drawing buildings in Potlatch

I'm not sure if the tag for building is in the Potlatch preset menu anywhere. But you can add any tags you like, whether they are in the presets or not.
To do this, click on the little "+" symbol, in the bottom right corner (just above the Save button). This will add a new blank tag.
Then type building in the box where it says "key", and type yes in the box for value.
Then that object will be tagged as a building, so you can save it to add it to OSM.

If you have added a tag you don't want, you can click on the little "x" next to the box for the value to remove it. or you can just delete all of the text in the box for the key.
Its worth reading the Potlatch primer which explains all this: http://wiki.openstreetmap.org/wiki/Potl … iting_tags

Offline

#3 2010-08-01 15:21:09

csdf
Member
From: UK, living in Abu Dhabi
Registered: 2009-08-11
Posts: 313
Website

Re: Drawing buildings in Potlatch

Add your own tag:
- Select the polygon outline (closed loop) of your building
- Click the little + sign in the lower right: this adds a new key/tag
- Edit the key so it says "building" (without the quote marks)
- Edit the value so it says "yes" (without the quote marks)
- Tada!

Offline

#4 2010-08-01 17:11:20

PHerison
Member
From: Rhein-Main
Registered: 2008-04-04
Posts: 1,672

Re: Drawing buildings in Potlatch

The presets in Potlatch are just a small selection of what the programers think are the "most needed" tags. You can add any tag you like as described above, also every day (OK perhaps not that frequent) new tags are invented. You can also use the "+"-Key on the keyboard to add new tag. I find this more handy using keyboard-shortcuts than pushing the mouse. Have a look at http://wiki.openstreetmap.org/wiki/Potl … _shortcuts !

Offline

Board footer

Powered by FluxBB