You are not logged in.

#1 2020-05-29 21:33:35

maro21
Member
From: Wrocław
Registered: 2018-03-06
Posts: 794

black and white building

Is there any way to draw a black and white building? Which is neither black nor white, it's black and white.

Example: https://i.postimg.cc/qBcDP51v/building.jpg

Offline

#2 2020-05-30 06:54:27

chachafish
Member
Registered: 2017-11-04
Posts: 35

Re: black and white building

Yes, it is possible, but it is very difficult and very time-consuming. Here is an example of a building I created in 3D. Please feel free to inspect the edits, but please don't change anything wink

https://demo.f4map.com/#lat=29.7391587& … phi=20.283

Offline

#3 2020-05-30 06:56:23

chachafish
Member
Registered: 2017-11-04
Posts: 35

Re: black and white building

If you want to see the building in the best light, you need to go to "graphic options" and select, "noon"

Offline

#4 2020-05-30 10:09:09

FvGordon
Member
Registered: 2009-08-29
Posts: 717

Re: black and white building

@chachafish: The high example building, you created in Houston Texas has one too thick white line (the tenth counting from the floor). The height walue of way https://www.openstreetmap.org/way/678647854 should be 35.3 instead of 35.8, the it's looking fine.

@maro21: for your example image, I would create a dark building a llittle smaller in width than needed to have space for the white parts attached to the walls where needed.

Offline

Board footer

Powered by FluxBB