You are not logged in.

#1 2018-12-14 09:55:30

This Is A Display Name Desu
Registered: 2018-11-19
Posts: 84

Level and layer of bridges/tunnels.

Normally, it seems like bridges and tunnels should be mapped with layers instead of level
However, when those bridges/tunnels connect multiple different buildings together, using only layer but not level would cause it being unable to represent that the bridge/tunnel connect those buildings together at certain level.
Is it okay to simply tag those bridges/tunnels with both layer/level in these cases?


#2 2018-12-14 23:25:32

Mateusz Konieczny
Registered: 2013-09-22
Posts: 2,255

Re: Level and layer of bridges/tunnels.

If object is on a specific building level it is OK to tag it this way. I for example tagged multilevel train station, with tram tunnel set to proper level value: … 1/19.94769

Wiki is probably meaning that level tag should not be used instead of layer tag,

Last edited by Mateusz Konieczny (2018-12-14 23:26:17)


#3 2018-12-15 09:47:46

Registered: 2015-04-01
Posts: 13

Re: Level and layer of bridges/tunnels.

I agree. layer is useful to know, at a specific point, which way is above and which way is under. level is useful to show all the items that are at the same level in a building. Both may be useful on the same way if a bridge or a tunnel connects two parts of a building.


Board footer

Powered by FluxBB