OpenStreetMap Forum

The Free Wiki World Map

You are not logged in.

#6201 2017-12-26 10:13:58

Self-Perfection
Member
Registered: 2013-10-12
Posts: 117

Re: OsmAnd - хотелки и предложения по улучшению

Как-то я в последнее время много безуспешно воюю с османдом (сейчас использую 2.8.2). Вот вроде встречал раньше функциональность, а сейчас найти не могу. Например, вроде встречал раньше поиск маршрутов на общественном транспорте. Раньше была не нужна, а недавно функциональность понадобилась, но не могу найти! Ладно, подумал может поиск маршрутов на ОТ привязан к профилям, вроде "Пешеходный"/"на автомобиле" и т.п. И ведь раньше где-то можно было выбирать, какие профили в османде включены. Сейчас нельзя.

Но самая большая проблема с записью трека. У меня на Jolla C работает замечательно: включаю запись трека, убираю телефон в карман, достаю через 2 часа - записан аккуратный подробный трек. Предложил знакомому с Xiaomi Redmi s3, Android 6.0.1 воспользоваться записью трека с помощью OsmAnd, так у него запись трека прекращается вскоре после выключения экрана! Т.е. если он погасит экран и уберёт в карман, то впоследствии окажется, что трек писался ну может ещё пару минут после этого, а дальнейший маршрут отсутствует, дыра. Где подкрутить в настройках, чтобы работало? В османде выставлен интервал записи 3 секунды. В андроиде релевантных настроек не нашли.

Last edited by Self-Perfection (2017-12-27 09:02:22)

Offline

#6202 2017-12-26 10:21:16

freeExec
Moderator
From: Ульяновск,Модератор всех слоёв
Registered: 2012-07-31
Posts: 7,566

Re: OsmAnd - хотелки и предложения по улучшению

Сейчас можно выделить остановку и показать нужный маршрут.
Вырубание спутников - это настройки электросбережения ОС.

Offline

#6203 2017-12-26 10:23:25

literan
Member
Registered: 2012-11-06
Posts: 2,772
Website

Re: OsmAnd - хотелки и предложения по улучшению

Self-Perfection wrote:

Например, вроде встречал раньше поиск маршрутов на общественном транспорте. Раньше была не нужна, а недавно функциональность понадобилась, но не могу найти!

если ткнуться в остановку, а потом вытянуть снизу шторку, то выдаст список маршрутов ОТ, через нее проходящих. Если нажать на маршрут, его покажет на карте. Или что вы имели в виду?

Offline

#6204 2017-12-26 10:24:38

literan
Member
Registered: 2012-11-06
Posts: 2,772
Website

Re: OsmAnd - хотелки и предложения по улучшению

freeExec wrote:

Вырубание спутников - это настройки электросбережения ОС.

+1. Ищите список программ, которые выключаются в фоне, и убирайте из него Османд

Offline

#6205 2017-12-26 17:10:54

Self-Perfection
Member
Registered: 2013-10-12
Posts: 117

Re: OsmAnd - хотелки и предложения по улучшению

literan wrote:

если ткнуться в остановку, а потом вытянуть снизу шторку, то выдаст список маршрутов ОТ, через нее проходящих. Если нажать на маршрут, его покажет на карте. Или что вы имели в виду?

Я имел ввиду построение маршрутов из A в B с использованием общественного транспорта. Типа: "дойдите тут до остановки, сядьте на автобус 100, езжайте до остановки "Детский сад", там пересядьте на 150 и ещё 5 остановок". Уверен, что раньше такое было.

Offline

#6206 2017-12-26 17:15:34

Self-Perfection
Member
Registered: 2013-10-12
Posts: 117

Re: OsmAnd - хотелки и предложения по улучшению

literan wrote:
freeExec wrote:

Вырубание спутников - это настройки электросбережения ОС.

+1. Ищите список программ, которые выключаются в фоне, и убирайте из него Османд

Спасибо обоим, получилось. Нашлась нужная настройка: Настройки (андроида) / [система и устройство] батарея и производительность / экономия энергии / выбрать приложения / тут нужно было для OsmAnd отключить ограничения фоновой активности.

Last edited by Self-Perfection (2017-12-27 01:12:07)

Offline

#6207 2017-12-26 17:41:52

literan
Member
Registered: 2012-11-06
Posts: 2,772
Website

Re: OsmAnd - хотелки и предложения по улучшению

Self-Perfection wrote:

Я имел ввиду построение маршрутов из A в B с использованием общественного транспорта. Типа: "дойдите тут до остановки, сядьте на автобус 100, езжайте до остановки "Детский сад", там пересядьте на 150 и ещё 5 остановок". Уверен, что раньше такое было.

вроде не было. И сейчас нет - только авто, пеше и вело навигация. В мапс.ми вот запилили навигацию по метро, и уже почти праздник lol

Offline

#6208 2017-12-27 07:20:13

coolkaas
Member
From: RU, Penza
Registered: 2009-05-28
Posts: 2,254

Re: OsmAnd - хотелки и предложения по улучшению

маршруты прокладывать можно было давно, сейчас это всё отключили.
как бы не в 2.0.0 уже выключили.

Offline

#6209 2017-12-27 09:13:50

xmd5a
Member
Registered: 2013-01-02
Posts: 879
Website

Re: OsmAnd - хотелки и предложения по улучшению

Навигации по маршрутам общественного транспорта в OsmAnd не было

Offline

#6210 2018-01-07 14:36:38

esaulenka
Member
From: Москва
Registered: 2010-08-21
Posts: 1,188
Website

Re: OsmAnd - хотелки и предложения по улучшению

Плотно попользовался османдом в прошедшие праздники.

Проблема первая. В какой-то момент пропал доступ к картам. Android 5.0, карты лежат на SD карточке (видно как /storage/external_SD/Android/data/net.osmand.plus/files ). При запуске - "добро пожаловать, сейчас вам надо скачать карты", при выборе нужного каталога в настройках - "Не возможно создать карты в указанном каталоге" (поправьте опечатку, кстати. Очень уж глаз режет). В прошлый раз лечил методом сноса всего и вся. Как бы попроще?..
Карточка при этом живая, другие программы с ней успешно работают.

Проблема вторая. Стандартная "ночная" тема. При обновлении экрана сначала рисуется белый (!) фон, потом заполняется чёрным/тёмно-зелёным/тёмно-синим содержимым. Моргания эти при езде по трассе сильно отвлекают. Сделайте, пожалуйста, какой-то фон по умолчанию, который можно настраивать в теме. В "дневной" теме аналогичные мерцания выглядят вполне нормально.

Offline

#6211 2018-01-07 19:48:30

Филиппок
Member
Registered: 2017-12-27
Posts: 28

Re: OsmAnd - хотелки и предложения по улучшению

А какая разница между османдом и викироутером ?  https://wikiroutes.info/

Offline

#6212 2018-01-07 20:23:43

pfg21
Member
From: Чебоксары
Registered: 2012-10-18
Posts: 3,142

Re: OsmAnd - хотелки и предложения по улучшению

ну наверное то, что османд - многофункциональная программа, а викироутер - сервис, заточенный под ОТ smile

Last edited by pfg21 (2018-01-07 20:30:01)

Offline

#6213 2018-01-21 10:52:19

LLlypuk82
Member
From: Витебск (Беларусь)
Registered: 2012-12-23
Posts: 2,373
Website

Re: OsmAnd - хотелки и предложения по улучшению

Есть пожелание добавить параметр нагрузки на ось для профиля «Грузовик». И учитывать при рассчёте маршрута.
Судя по всему, вот здесь не обрабатывается
health_specialty:traumatology=main (а только yes учитывается)

Last edited by LLlypuk82 (2018-01-21 20:29:57)

Offline

#6214 2018-01-22 12:24:34

Глеб
Member
From: Kazan, RU-TA
Registered: 2012-03-03
Posts: 189

Re: OsmAnd - хотелки и предложения по улучшению

LLlypuk82 wrote:

Есть пожелание добавить параметр нагрузки на ось для профиля «Грузовик». И учитывать при рассчёте маршрута.

Можно поиграть с routing.xml.

<?xml version="1.0" encoding="utf-8" ?>
<osmand_routing_config defaultProfile="car">
	<!-- 1. parameters of routing and different tweaks Influence on A* : -->
	<!-- f(x) + heuristicCoefficient*g(X) -->
	<!-- TEMPORARY needs to be reverted to 1 -->
	<attribute name="heuristicCoefficient" value="" />

	<!-- 1.1 tile load parameters (should not affect routing) -->
	<!-- by default 16 -->
	<attribute name="zoomToLoadTiles" value="16" />
	<!--  by default it is 30. Value specified here overwrites all others
			 (don't specify here ! it is device dependent)  -->
	<attribute name="memoryLimitInMB" value="" />
	<attribute name="nativeMemoryLimitInMB" value="" />

	<!-- 1.2 Build A* graph in backward/forward direction (can affect results) -->
	<!-- 0 - 2 ways, 1 - direct way, -1 - reverse way -->
	<attribute name="planRoadDirection" value="0" />

	<!-- 1.3 When there is a query to recalculate route, -->
	<!-- recalculate smart using old route within N-meters (0 recalculate fresh, default 10km)  -->
	<attribute name="recalculateDistanceHelp" value="10000" />

	<!-- HELP INFORMATION ABOUT FILE -->
	<!--
	   Description of blocks:
	     1) <way attribute="access">
	        Defines acceptable roads for routingProfile. Value of -1 means way impassable,
	        value of 1 means way passable.
	     2) <way attribute="speed" type="speed">
	        Defines speed limits on roads in km/h (if it is not specified on the road via maxspeed tag)
	     3) <way attribute="priority">
	     	Priority is a preference multiplicator for the road type (consider it is an accelerator of the road)
	     4) <point attribute="obstacle">
	        Obstacle defines a point of the road and whether it can be passed by the vehicle.
	        Penalty is measured in seconds, a value of -1 means the obstacle cannot be passed and a value of 0 means "no penalty"!
	        For routing engine.
             5) <point attribute="obstacle_time">
                Penalty for crossing a feature on the road. It is measured in seconds.
                Only for visual effect (ETA).
	     		
	   The order of specialization matters only how it was supplied :
	      short_way, avoid_ferries, avoid_toll, avoid_motorway, avoid_unpaved
	   
	   Conditional values (based on parameters) can be specified as:
	      <select value="x" t="y" v="z">
                <if param="parameter id"/>
              </select>
	-->
	<routingProfile name="car" baseProfile="car" restrictionsAware="true" minDefaultSpeed="45.0" maxDefaultSpeed="130.0"
			leftTurn="5" rightTurn="5" roundaboutTurn="10" onewayAware="true">
	    <!--
		<attribute name="heuristicCoefficient" value="1.5" />

		-->
		<!-- NEW ROUTING API -->
		
		<!-- <parameter id="prefer_motorway" name="Prefer motorways" description="Prefer motorways" type="boolean"/> -->
		<!-- <parameter id="no_new_routing" name="Do not use v1.9 routing" description="Do not use v1.9 routing" type="boolean"/> -->
		
		<parameter id="short_way" name="Short way" description="Short way" type="boolean"/>
		<parameter id="avoid_toll" name="Avoid toll roads" description="Avoid toll roads" type="boolean"/>
		<parameter id="avoid_unpaved" name="Avoid unpaved roads" description="Avoid unpaved roads" type="boolean"/>
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_shuttle_train" name="Avoid Shuttle Trains" description="Avoid Shuttle Trains" type="boolean"/>
		<parameter id="avoid_motorway" name="Avoid motorways" description="Avoid motorways" type="boolean"/>
		<parameter id="avoid_borders" name="Avoid border crossing" description="Avoid crossing a border into another country" type="boolean"/>
		<parameter id="avoid_ice_roads_fords" name="Avoid ice roads, fords" description="Avoid ice roads and fords" type="boolean"/>
		<parameter id="allow_private" name="Allow private access" description="Allow access to private areas" type="boolean"/>
		<parameter id="weight" name="Weight" description="Maximum vehicle weight to be permitted on the route" type="numeric" values="0,1.49,2.99,3.49,4.99,7.49,9.99,14.99,19.99,39.99" valueDescriptions="-,1.5t,3t,3.5t,5t,7.5t,10t,15t,20t,40t"/>
		
		<parameter id="axleload" name="AxleLoad" description="Maximum axle load to be permitted on the route" type="numeric" values="0,1.49,2.99,3.49,4.99,7.49,9.99,14.99,19.99,39.99" valueDescriptions="-,1.5t,3t,3.5t,5t,7.5t,10t,15t,20t,40t"/>
		<parameter id="height" name="Height" description="Maximum vehicle height to be permitted on the route" type="numeric" values="0,1.49,1.99,2.49,2.99,3.49,3.99" valueDescriptions="-,1.5m,2m,2.5m,3m,3.5m,4m"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>

			<select value="-1" t="highway" v="motorway">
				<if param="avoid_motorway"/>
			</select>
			<select value="-1" t="ice_road" v="yes">
				<if param="avoid_ice_roads_fords"/>
			</select>
			<select value="-1" t="winter_road" v="yes">
				<if param="avoid_ice_roads_fords"/>
			</select>
			<select value="-1" t="ford" v="yes">
				<if param="avoid_ice_roads_fords"/>
			</select>
			<select value="-1" t="toll" v="yes">
				<if param="avoid_toll"/>
			</select>
			<select value="-1" t="route" v="ferry">
				<if param="avoid_ferries"/>
			</select>
			<select value="-1" t="route" v="shuttle_train">
				<if param="avoid_shuttle_train"/>
			</select>
			<if param="avoid_unpaved">
				<select value="-1" t="highway" v="track"/>
				<select value="-1" t="surface" v="unpaved"/>
				<select value="-1" t="surface" v="compacted"/>
				<select value="-1" t="surface" v="dirt"/>
				<select value="-1" t="surface" v="gravel"/>
				<select value="-1" t="surface" v="fine_gravel"/>
				<select value="-1" t="surface" v="grass"/>
				<select value="-1" t="surface" v="ground"/>
				<select value="-1" t="surface" v="mud"/>
				<select value="-1" t="surface" v="pebblestone"/>
				<select value="-1" t="surface" v="sand"/>
<!--				<select value="-1" t="surface" v="wood"/>-->
				<select value="-1" t="smoothness" v="very_bad"/>
				<select value="-1" t="smoothness" v="horrible"/>
				<select value="-1" t="smoothness" v="very_horrible"/>
				<select value="-1" t="smoothness" v="impassable"/>
			</if>

			<select value="-1" t="motorcar" v="no"/>
			<select value="-1" t="motorcar" v="agricultural"/>
			<select value="-1" t="motorcar" v="forestry"/>
			<select value="1"  t="motorcar" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="motorcar" v="private"/>
			</if>
			<select value="-1"  t="motorcar" v="private"/>
			<select value="1"  t="motorcar" v="permissive"/>
			<select value="1"  t="motorcar" v="designated"/>
			<select value="1"  t="motorcar" v="destination"/>
			<select value="1"  t="motorcar" v="customers"/>
			<select value="1"  t="motorcar" v="official"/>

			<select value="-1" t="motor_vehicle" v="no"/>
			<select value="-1" t="motor_vehicle" v="agricultural"/>
			<select value="-1" t="motor_vehicle" v="forestry"/>
			<select value="1"  t="motor_vehicle" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="motor_vehicle" v="private"/>
			</if>
			<select value="-1"  t="motor_vehicle" v="private"/>
			<select value="1"  t="motor_vehicle" v="permissive"/>
			<select value="1"  t="motor_vehicle" v="designated"/>
			<select value="1"  t="motor_vehicle" v="destination"/>
			<select value="1"  t="motor_vehicle" v="customers"/>
			<select value="1"  t="motor_vehicle" v="official"/>

			<select value="-1" t="vehicle" v="no"/>
			<select value="-1" t="vehicle" v="agricultural"/>
			<select value="-1" t="vehicle" v="forestry"/>
			<select value="1"  t="vehicle" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="vehicle" v="private"/>
			</if>
			<select value="-1"  t="vehicle" v="private"/>
			<select value="1"  t="vehicle" v="permissive"/>
			<select value="1"  t="vehicle" v="designated"/>
			<select value="1"  t="vehicle" v="destination"/>
			<select value="1"  t="vehicle" v="customers"/>

			<select value="-1" t="access" v="no"/>
			<select value="-1" t="access" v="agricultural"/>
			<select value="-1" t="access" v="forestry"/>
			<select value="-1" t="access" v="emergency"/>
			<select value="1"  t="access" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="access" v="private"/>
			</if>
			<select value="-1"  t="access" v="private"/>
			<select value="1"  t="access" v="permissive"/>
			<select value="1"  t="access" v="destination"/>
			<select value="1"  t="access" v="customers"/>

			<!-- introduce special tag motorcycle ! --><!-- What is special in it? It is a defined value and used in the database -->
			<!-- <select value="-1" t="motorcycle" v="no"/>-->
			<select value="-1" t="barrier" v="bollard"/>
			<select value="-1" t="barrier" v="chain"/>
			<select value="-1" t="barrier" v="debris"/>
			<select value="-1" t="barrier" v="block"/>

			<select value="-1" t="maxweight">
				<gt value1=":weight" value2="$maxweight" type="weight"/>
			</select>
			<select value="-1" t="maxaxleload">
				<gt value1=":axleload" value2="$maxaxleload" type="axleload"/>
			</select>
			<select value="-1" t="maxheight">
				<gt value1=":height" value2="$maxheight" type="length"/>
			</select>

			<select value="1" t="highway" v="motorway"/>
			<select value="1" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="route" v="ferry"/>
			<select value="1" t="route" v="shuttle_train"/>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
			<select value="1" t="roundabout"/>
			<select value="1" t="junction" v="roundabout"/>
		</way>

		<way attribute="penalty_transition">
			<!-- cost in time when you change the route from motorway to primary or from primary
				 to living_street, but not other way around. Calculated as difference between values -->
			<!-- 
			<if param="no_new_routing">
				<select value="0"/>
			</if>
			-->
			<if param="short_way">
				<select value="0" t="highway" v="motorway"/>
				<select value="5" t="highway" v="motorway_link"/>
				<select value="5" t="highway" v="trunk"/>
				<select value="10" t="highway" v="trunk_link"/>
				<select value="10" t="highway" v="primary"/>
				<select value="15" t="highway" v="primary_link"/>
				<select value="15" t="highway" v="secondary"/>
				<select value="20" t="highway" v="secondary_link"/>
				<select value="20" t="highway" v="tertiary"/>
				<select value="25" t="highway" v="tertiary_link"/>
				<select value="40" t="highway" v="service"/>
				<select value="25"/>
			</if>
			
			<select value="0" t="highway" v="motorway"/>
			<select value="10" t="highway" v="motorway_link"/>
			<select value="10" t="highway" v="trunk"/>
			<select value="15" t="highway" v="trunk_link"/>
			<select value="50" t="highway" v="primary"/>
			<select value="60" t="highway" v="primary_link"/>
			<select value="100" t="highway" v="secondary"/>
			<select value="110" t="highway" v="secondary_link"/>
			<select value="130" t="highway" v="tertiary"/>
			<select value="139" t="highway" v="tertiary_link"/>
			<select value="185" t="highway" v="residential"/>
			<select value="230" t="highway" v="service"/>
			<select value="200"/>
			
			<!--
			<select value="" t="highway" v="road"/>
			<select value="" t="highway" v="residential"/>
			<select value="" t="highway" v="track"/>
			<select value="" t="highway" v="unclassified"/>
			<select value="" t="highway" v="service"/>
			
			<select value="" t="highway" v="living_street"/>
			<select value="" t="route" v="ferry"/>-->
		</way>

		<way attribute="speed" type="speed">
			<!-- shortway handled internally -->
			<select value="$maxspeed:practical" t="maxspeed:practical"/>
			<select value="$maxspeed:advisory" t="maxspeed:advisory"/>
			<select value="$maxspeed" t="maxspeed"/>
			
			<!-- most important backbone roads -->
			<select value="110" t="highway" v="motorway"/>
			<select value="110" t="highway" v="motorway_link"/>
			<select value="100" t="highway" v="trunk"/>
			<select value="75" t="highway" v="trunk_link"/>

			<!-- generally linking larger towns -->
			<select value="65" t="highway" v="primary"/>
			<select value="50" t="highway" v="primary_link"/>
			<!-- generally linking smaller towns and villages -->
			<select value="60" t="highway" v="secondary"/>
			<select value="50" t="highway" v="secondary_link"/>
			
			<!-- important urban roads -->
			<select value="45" t="highway" v="tertiary"/>
			<select value="40" t="highway" v="tertiary_link"/>
			
			<!-- Some values of "abutters" mean the road is inside a place,
			     so cap the speed even if it is a high level road (below). -->
			<!--
			<select value="30" t="abutters" v="residential"/>
			<select value="30" t="abutters" v="commercial"/>
			<select value="30" t="abutters" v="retail"/>
			<select value="30" t="abutters" v="industrial"/>
			<select value="30" t="abutters" v="mixed"/>
			-->
			<!-- roads with speeds lower than 50 and those that we want to ignore abutters
			     must be placed before the "abutters" block below. -->
			
			<!-- lowest form of grid network, usually 90% of urban roads -->
			<select value="35" t="highway" v="unclassified"/>
			<!-- road = no type, no review and may be not accurate -->
			<select value="35" t="highway" v="road"/>
			<select value="35" t="highway" v="residential"/>
			<select value="15" t="highway" v="track"/>

			<select value="30" t="highway" v="service"/>
			<select value="25" t="highway" v="living_street"/>
			<select value="15" t="route" v="ferry"/>
			<select value="60" t="route" v="shuttle_train"/>

		</way>

		<way attribute="priority">
			<!-- not working fine -->
			<!--
			<if param="prefer_motorway">
				<select value="1.2" t="highway" v="motorway"/>
				<select value="1.1" t="highway" v="motorway_link"/>
				<select value="1.2" t="highway" v="trunk"/>
				<select value="1.1" t="highway" v="trunk_link"/>
			</if> -->
			<!-- access deprioritize -->
			<select t="tracktype" v="grade5" value="0.2"/>
			<select t="motorcar" v="private" value="0.15"/>
			<select t="motorcar" v="destination" value="0.15"/>
			<select t="motorcar" v="delivery" value="0.15"/>
			<select t="motorcar" v="customers" value="0.15"/>
			<select t="motor_vehicle" v="private" value="0.15"/>
			<select t="motor_vehicle" v="destination" value="0.15"/>
			<select t="motor_vehicle" v="delivery" value="0.15"/>
			<select t="motor_vehicle" v="customers" value="0.15"/>
			<select t="vehicle" v="private" value="0.15"/>
			<select t="vehicle" v="destination" value="0.15"/>
			<select t="vehicle" v="delivery" value="0.15"/>
			<select t="vehicle" v="customers" value="0.15"/>
			<select t="access" v="private" value="0.15"/>
			<select t="access" v="destination" value="0.15"/>
			<select t="access" v="delivery" value="0.15"/>
			<select t="access" v="customers" value="0.15"/>

			<select value="0.3" t="smoothness" v="very_bad"/>
			<select value="0.15" t="smoothness" v="horrible"/>
			<select value="0.1" t="smoothness" v="very_horrible"/>
			<select value="0.05" t="smoothness" v="impassable"/>

			<select value="1.1" t="highway" v="motorway"/>
			<!-- make links slightly smaller so in connections they will not be used -->
			<select value="1" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="0.9" t="highway" v="trunk_link"/>
			<!-- generally linking larger towns. -->
			<select value="1.0" t="highway" v="primary"/>
			<select value="0.95" t="highway" v="primary_link"/>
			<!-- generally linking smaller towns and villages -->
			<select value="0.95" t="highway" v="secondary"/>
			<select value="0.9" t="highway" v="secondary_link"/>
			<!-- important urban roads -->
			<select value="0.9" t="highway" v="tertiary"/>
			<select value="0.8" t="highway" v="tertiary_link"/>
			<!-- lowest form of grid network, usually 90% of urban roads -->
			<select value="0.7" t="highway" v="unclassified"/>
			<!-- road = no type, no review and may be not accurate -->
			<select value="0.7" t="highway" v="road"/>
			<select value="0.7" t="highway" v="residential"/>

			<select value="0.5" t="highway" v="track"/>

			<select value="0.5" t="highway" v="service"/>
			<select value="0.5" t="highway" v="living_street"/>
			<select value="1" t="route" v="ferry"/>
			<select value="1" t="route" v="shuttle_train"/>

			<select value="0.7"/>
		</way>

		<point attribute="obstacle_time">
			<select value="5"  t="barrier" v="entrance"/>
			<select value="15" t="barrier" v="gate"/>
			<select value="5"  t="barrier" v="height_restrictor"/>
			<select value="15" t="barrier" v="lift_gate"/>
			<select value="30" t="barrier" v="swing_gate"/>
			<select value="25" t="barrier" v="toll_booth"/>
			<select value="25" t="barrier"/>
			<select value="10" t="traffic_calming"/>
			<select value="30" t="highway" v="traffic_signals"/>
			<select value="1"  t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="15" t="highway" v="crossing"/>
			<select value="15" t="highway" v="stop"/>
			<select value="10" t="highway" v="give_way"/>
			<select value="25" t="ford"/>

			<select value="25" t="railway" v="crossing"/>
			<select value="25" t="railway" v="level_crossing"/>
		</point>

		<point attribute="obstacle">
			<if param="avoid_toll">
				<select value="-1" t="barrier" v="toll_booth"/>	
			</if>
			<if param="avoid_borders">
				<select value="-1" t="barrier" v="border_control"/>
			</if>

			<!-- Some barrier nodes are combined with maxheight, e.g. height_restrictor or underground parking entrances. -->
			<select value="-1" t="maxheight">
				<gt value1=":height" value2="$maxheight" type="length"/>
			</select>

			<!-- If access for a car is explicitly marked, the barrier is passable,
			     with a slight penalty.
			     If no access for a car is explicitly marked, the barrier is impassable.
			     Evaluate the keys in descending order of the specificity in the access hierarchy. -->
			<select value="-1" t="motorcar" v="no"/>
			<select value="-1" t="motorcar" v="agricultural"/>
			<select value="-1" t="motorcar" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="motorcar" v="private"/>
			</if>
			<select value="60"  t="motorcar" v="destination"/>
			<select value="0"  t="motorcar" v="yes"/>
			<select value="0"  t="motorcar" v="permissive"/>
			<select value="0"  t="motorcar" v="designated"/>
			<select value="0"  t="motorcar" v="customers"/>
			<select value="0"  t="motorcar" v="official"/>
			
			<select value="-1" t="motor_vehicle" v="no"/>
			<select value="-1" t="motor_vehicle" v="agricultural"/>
			<select value="-1" t="motor_vehicle" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="motor_vehicle" v="private"/>
			</if>
			<select value="60"  t="motor_vehicle" v="destination"/>
			<select value="0"  t="motor_vehicle" v="yes"/>
			<select value="0"  t="motor_vehicle" v="permissive"/>
			<select value="0"  t="motor_vehicle" v="designated"/>
			<select value="0"  t="motor_vehicle" v="customers"/>
			<select value="0"  t="motor_vehicle" v="official"/>

			<select value="-1" t="vehicle" v="no"/>
			<select value="-1" t="vehicle" v="agricultural"/>
			<select value="-1" t="vehicle" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="vehicle" v="private"/>
			</if>
			<select value="60"  t="vehicle" v="destination"/>
			<select value="0"  t="vehicle" v="yes"/>
			<select value="0"  t="vehicle" v="permissive"/>
			<select value="0"  t="vehicle" v="designated"/>
			<select value="0"  t="vehicle" v="customers"/>

			<select value="-1" t="access" v="no"/>
			<select value="-1" t="access" v="agricultural"/>
			<select value="-1" t="access" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="access" v="private"/>
			</if>
			<select value="60"  t="access" v="destination"/>
			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			<select value="0"  t="access" v="customers"/>
			<if param="short_way">
				<select value="0" t="barrier" v="cattle_grid"/>
				<select value="0" t="barrier" v="border_control"/>
				<select value="0" t="barrier" v="bump_gate"/>
				<select value="0" t="barrier" v="entrance"/>
				<select value="0" t="barrier" v="height_restrictor"/>
				<select value="0" t="barrier" v="sally_port"/>
				<select value="0" t="barrier" v="toll_booth"/>
				<select value="0" t="barrier" v="lift_gate"/>
				<select value="0" t="barrier" v="swing_gate"/>
				<select value="-1" t="barrier"/>
			</if>
			<select value="5"   t="barrier" v="cattle_grid"/>
			<select value="300" t="barrier" v="border_control"/>
			<select value="300" t="barrier" v="bump_gate"/>
			<select value="1"   t="barrier" v="entrance"/>
			<select value="100" t="barrier" v="height_restrictor"/>
			<select value="100" t="barrier" v="sally_port"/>
			<select value="1"   t="barrier" v="toll_booth"/>
			<!-- These 2 shouldn't be allowed per the wiki (access=no is assumed) but people often do not add the proper access tags. -->
			<select value="300" t="barrier" v="lift_gate"/>
			<select value="300" t="barrier" v="swing_gate"/>
			<!-- Without explicit access marking, barriers other than the listed values above are impassable to a car. -->
			<if param="allow_private">
				<select value="300" t="barrier" v="gate"/>
			</if>
			<select value="-1" t="barrier"/>

			<select value="10" t="traffic_calming"/>
			<!-- New introduction to not drive through city -->
			<select value="15" t="highway" v="traffic_signals"/>

			<select value="25" t="ford"/>
		</point>
	</routingProfile>

	<routingProfile name="bicycle" baseProfile="bicycle" restrictionsAware="true" minDefaultSpeed="2" maxDefaultSpeed="33"
			leftTurn="4" rightTurn="2" followSpeedLimitations="false" onewayAware="true" heuristicCoefficient="1.4">
		<!-- <attribute name="relaxNodesIfStartDistSmallCoeff" value="2.5"/>  -->
		<!-- New ROUTING API -->

<!--		<parameter id="driving_style" name="Driving style" description="Safe, fast or balanced driving" type="numeric" values="0,1,2" valueDescriptions="Safety,Balance,Speed"/>-->
<!--		<parameter id="relief_smoothness_factor" name="Relief smoothness factor" description="More plains or more hills" type="numeric" values="0,1,2" valueDescriptions="More plains,Balance,More hills"/>-->

		<parameter id="driving_style_safety" group="driving_style" name="Safety" description="" type="boolean"/>
		<parameter id="driving_style_balance" group="driving_style" name="Balance" description="" type="boolean" default="true"/>
		<parameter id="driving_style_speed" group="driving_style" name="Speed" description="" type="boolean"/>

		<parameter id="relief_smoothness_factor_more_plains" group="relief_smoothness_factor" name="More plains" description="" type="boolean"/>
		<parameter id="relief_smoothness_factor_plains" group="relief_smoothness_factor" name="Plains" description="" type="boolean" default="true"/>
		<parameter id="relief_smoothness_factor_hills" group="relief_smoothness_factor" name="Hills" description="" type="boolean"/>
		<parameter id="avoid_unpaved" name="Avoid unpaved roads" description="Avoid unpaved roads" type="boolean"/>
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_stairs" name="Avoid stairs" description="Avoid stairs" type="boolean"/>
		<parameter id="avoid_borders" name="Avoid border crossing" description="Avoid crossing a border into another country" type="boolean"/>
		<parameter id="allow_motorway" name="Allow motorways" description="Allow motorways" type="boolean"/>
		<parameter id="height_obstacles" name="Use elevation data" description="Use terrain elevation data provided by SRTM, ASTER and EU-DEM" type="boolean"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>

			<if param="allow_motorway">
				<select value="-1" t="access" v="no"/>
				<select value="-1" t="access" v="private"/>
				<select value="-1" t="motorroad" v="yes"/>
				<select value="-1" t="bicycle" v="no"/>
				<select value="-1" t="vehicle" v="no"/>
				<select value="1" t="highway" v="motorway"/>
				<select value="1" t="highway" v="motorway_link"/>
				<select value="1" t="highway" v="trunk"/>
				<select value="1" t="highway" v="trunk_link"/>
			<!-- line above: I have deleted this line, it concerned motorroads.
 			These have already been excluded above (which is the right choice). -->

			</if>
			<select value="-1" t="route" v="ferry">
				<if param="avoid_ferries"/>
			</select>
			<select value="-1" t="highway" v="steps">
				<if param="avoid_stairs"/>
			</select>
			<select value="-1" t="highway" v="motorway"/>
			<select value="-1" t="highway" v="motorway_link"/>
			<select value="-1" t="motorroad" v="yes"/>
			<!-- lines above: These lines should be moved here
			to make sure that motorways are excluded if they
			are not explicitly allowed by the user.-->
			<select value="-1" t="highway" v="elevator"/>

			<select value="-1" t="bicycle" v="no"/>
			<select value="1"  t="bicycle" v="yes"/>
			<select value="1"  t="bicycle" v="permissive"/>
			<select value="1"  t="bicycle" v="designated"/>
			<select value="1"  t="bicycle" v="destination"/>
			<select value="1"  t="bicycle" v="official"/>
			<select value="1"  t="bicycle" v="use_sidepath"/>
			<select value="1"  t="bicycle" v="dismount"/>
			<if param="driving_style_safety">
				<select value="-1" t="highway" v="trunk"/>
				<select value="-1" t="highway" v="trunk_link"/>
			</if>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<!-- a user indicated a trunk road in England that was a
			a necessary link. So only in safety style trunk is excluded now. -->
			<select value="-1" t="sac_scale" v="demanding_mountain_hiking"/>
			<select value="-1" t="sac_scale" v="alpine_hiking"/>
			<select value="-1" t="sac_scale" v="demanding_alpine_hiking"/>
			<select value="-1" t="sac_scale" v="difficult_alpine_hiking"/>
			<select value="-1" t="mtb:scale" v="5"/>
			<select value="-1" t="mtb:scale" v="6"/>
			<select value="1" t="vehicle" v="agricultural"/>
			<select value="1" t="vehicle" v="forestry"/>
			<select value="1"  t="vehicle" v="yes"/>
			<select value="1"  t="vehicle" v="permissive"/>
			<select value="1"  t="vehicle" v="designated"/>
			<select value="1"  t="vehicle" v="destination"/>
			
			<select value="-1" t="access" v="no"/>
			<select value="-1" t="access" v="private"/>
			<select value="1" t="access" v="agricultural"/>
			<select value="1" t="access" v="forestry"/>
			<select value="1"  t="access" v="yes"/>
			<select value="1"  t="access" v="permissive"/>
			
			<select value="1" t="highway" v="cycleway"/>
			<select value="1" t="route_bicycle"/>
			<!-- Two lines above: These have to be before the vehicle=no command -->
			<select value="-1" t="vehicle" v="no"/>
			<select value="-1" t="crossing" v="no"/>

			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="path"/>
			<select value="1" t="highway" v="footway"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="highway" v="pedestrian"/>
			<select value="1" t="highway" v="byway"/>
			<select value="1" t="highway" v="platform"/>
			<select value="1" t="highway" v="services"/>
			<select value="1" t="highway" v="bridleway"/>
			<select value="1" t="highway" v="steps"/>
			<select value="1" t="route" v="ferry"/>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="0" t="cycleway" v="opposite_lane"/>
			<select value="0" t="cycleway" v="opposite_track"/>
			<select value="0" t="cycleway" v="opposite_share_busway"/>
			<select value="0" t="cycleway" v="opposite"/>
			<select value="0" t="oneway:bicycle" v="no"/>
			<select value="1" t="oneway:bicycle" v="yes"/>
			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
			<select value="1" t="roundabout" v="yes"/>
			<select value="1" t="junction" v="roundabout"/>
		</way>

		<way attribute="speed" type="speed">
			<select value="1.3" t="highway" v="steps"/>
			<select value="3" t="route"   v="ferry"/>
			<select value="6" t="bicycle" v="dismount"/>
			<if param="driving_style_speed">
				<select value="19" t="highway" v="motorway"/>
				<select value="19" t="highway" v="motorway_link"/>
				<select value="19" t="highway" v="trunk"/>
				<select value="19" t="highway" v="trunk_link"/>
				<select value="19" t="highway" v="primary"/>
				<select value="19" t="highway" v="primary_link"/>
				<select value="19" t="highway" v="secondary"/>
				<select value="19" t="highway" v="secondary_link"/>
				<select value="19" t="highway" v="tertiary"/>
				<select value="19" t="highway" v="tertiary_link"/>
				<select value="21" t="route_bicycle"/>
				<!-- Line above: Command should be moved up here, to be applied more
				often. If a residential way is marked route bicycle, this higher value will
				now apply. The same for all the categories that follow. This makes
				sense even in speed style, because if you stay away from main roads,
				you avoid traffic lights (and thus save time). So main roads will be
				avoided if there is an official cycle route nearby (should be fast). --> 
				<!-- Line above: Is there a possibility to EXCLUDE this command if avoid unpaved is set? -->
				<select value="19" t="highway" v="residential"/>
				<select value="18" t="highway" v="unclassified"/>
				<select value="33" t="highway" v="cycleway"/>
				<select value="33" t="path_bicycle_designated"/>
				<select value="28" t="bicycle" v="designated"/>
				<select value="8.5" t="highway" v="track"/>
				<select value="7" t="highway" v="footway"/>
				<select value="6" t="highway" v="path"/>
			</if>
			<select value="6" t="highway" v="motorway"/>
			<select value="6" t="highway" v="motorway_link"/>
			<select value="7" t="highway" v="trunk"/>
			<select value="7" t="highway" v="trunk_link"/>

			<select value="20" t="cycleway" v="sidepath"/>
			<!-- Line above: This tag is used for cycleways along main
			roads. These need to be downgraded before the 31 kmh
			for bicycle designated are set. -->
			
			<ifnot param="avoid_unpaved">
				<select value="31" t="bicycle" v="designated"/>
			</ifnot>
			
			<!-- Lines above: This fixed value for bicycle=designated will not be applied in 
			"avoid unpaved" mode. Reason: The kmh value that we set here is fixed, it can not
			be downgraded later. Generally, it makes sense to set a fixed value here for
			bicycle=designated.  Otherwise there would be one major error: The combination of
			designated AND asphalt (frequently found ) would get a much lower value than just
			designated alone. -->

			<if param="driving_style_safety">
				<select value="7" t="highway" v="primary"/>
				<select value="7" t="highway" v="primary_link"/>
				<select value="9" t="highway" v="secondary"/>
				<select value="9" t="highway" v="secondary_link"/>
				<select value="14" t="highway" v="tertiary"/>
				<select value="14" t="highway" v="tertiary_link"/>
				<select value="18" t="highway" v="residential"/>
				<select value="24" t="highway" v="cycleway"/>
				<select value="27" t="route_bicycle"/>
				<!-- The integration of "bicycle routes" offers great possibilities.
				But still there are many examples where Osmand can even find
				a better alternative. Now, three choices  help to combine the
				strengths of the existing routing with bicycle routes:
				First, if a path, track or footway is a cycle route, it gets a big upgrade.
				Second, bicycle routes that lead over main roads are not upgraded. They
				are normally not especially safe or attractive. Example: In Berlin, one
				cycle route is on "Heerstrasse" which is not good for cycling at all. And
				for some cycle routes in Berlin and Vienna there are better alternatives.
				Third, there are even some unpaved bicycle routes. These get a downgrade
				later. And if a bicycle route has no surface tag, there is a slight risk that
				it is unpaved. Therefore, it will be downgraded a little bit. --> 
				<select value="22" t="highway" v="track"/>
				<select value="20" t="highway" v="path"/>
				<select value="19" t="highway" v="footway"/>
			</if>

			<select value="10" t="highway" v="primary"/>
			<select value="10" t="highway" v="primary_link"/>
			<select value="13" t="highway" v="secondary"/>
			<select value="13" t="highway" v="secondary_link"/>
			<select value="18" t="highway" v="tertiary"/>
			<select value="18" t="highway" v="tertiary_link"/>
			<select value="25.0" t="route_bicycle"/>
			<select value="23" t="highway" v="residential"/>
			<select value="24" t="highway" v="cycleway"/>
			<select value="23" t="highway" v="unclassified"/>
			<select value="11" t="highway" v="service"/>
			<select value="22" t="highway" v="track"/>
			<select value="19" t="highway" v="path"/>
			<select value="15" t="highway" v="footway"/>
			<select value="19" t="highway" v="road"/>
			<select value="24" t="highway" v="living_street"/>
			<select value="8" t="highway" v="pedestrian"/>

			<select value="10"  t="highway" v="byway"/>
			<select value="2" t="highway" v="platform"/>
			<select value="2" t="highway" v="services"/>
			<select value="2" t="highway" v="bridleway"/>
			<select value="14.5"/>
		</way>

		<way attribute="obstacle_srtm_alt_speed">
			<if param="height_obstacles">
				<gt value1="-100" value2=":incline">
					<select value="-1" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="-1" t="highway" v="path"/>
					<select value="-1" t="highway" v="track"/>
				</gt>
				<gt value1="-25" value2=":incline">
					<select value="180" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="180" t="highway" v="path"/>
					<select value="170" t="highway" v="track"/>
				</gt>
				<gt value1="-17" value2=":incline">
					<select value="150" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="150" t="highway" v="path"/>
					<select value="140" t="highway" v="track"/>
				</gt>
				<gt value1="-9" value2=":incline">
					<select value="30" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="30" t="highway" v="path"/>
					<select value="25" t="highway" v="track"/>
				</gt>
				<gt value1="-3" value2=":incline">
					<select value="2" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="2" t="highway" v="path"/>
					<select value="2" t="highway" v="track"/>
				</gt>
				<if param="relief_smoothness_factor_more_plains">
					<gt value1="3" value2=":incline">
						<select value="2"/>
					</gt>
					<gt value1="7" value2=":incline">
						<select value="12"/>
					</gt>
					<gt value1="13" value2=":incline">
						<select value="30"/>
					</gt>
					<gt value1="25" value2=":incline">
						<select value="50"/>
					</gt>
					<select value="74"/>
				</if>
				<if param="relief_smoothness_factor_hills">
					<gt value1="0" value2=":incline">
						<select value="128"/>
					</gt>
					<gt value1="3" value2=":incline">
						<select value="64"/>
					</gt>
					<gt value1="7" value2=":incline">
						<select value="17"/>
					</gt>
					<gt value1="13" value2=":incline">
						<select value="10"/>
					</gt>
					<gt value1="25" value2=":incline">
						<select value="8"/>
					</gt>
					<select value="2"/>
				</if>
				<gt value1="3" value2=":incline">
					<select value="2"/>
				</gt>
				<gt value1="7" value2=":incline">
					<select value="8"/>
				</gt>
				<gt value1="13" value2=":incline">
					<select value="16"/>
				</gt>
				<gt value1="25" value2=":incline">
					<select value="32"/>
				</gt>
				<select value="48"/>
			</if>
		</way>

		<way attribute="priority">
			<select value="0.1" t="bicycle" v="private"/>
			<select value="0.2" t="bicycle" v="destination"/>
<!--			<select value="0.05" t="access" v="private"/>-->
			<select value="0.3" t="indoor" v="yes"/>
			<select value="0.1" t="barrier" v="debris"/>
			<select value="0.1" t="bicycle" v="use_sidepath"/>

			<if param="avoid_unpaved">
				<select value="0.3" t="osmand_highway_integrity_brouting" v="3"/>
				<select value="0.28" t="osmand_highway_integrity_brouting" v="4"/>
				<select value="0.27" t="osmand_highway_integrity_brouting" v="5"/>
				<select value="0.25" t="osmand_highway_integrity_brouting" v="6"/>
				<select value="0.2" t="osmand_highway_integrity_brouting" v="7"/>
				<select value="0.15" t="osmand_highway_integrity_brouting" v="8"/>
				<select value="0.1" t="osmand_highway_integrity_brouting" v="9"/>
				<select value="0.05" t="osmand_highway_integrity_brouting" v="10"/>

<!--				<select value="0.4" t="tracktype" v="grade2"/>
				<select value="0.1" t="tracktype" v="grade3"/>
				<select value="0.1" t="tracktype" v="grade4"/>
				<select value="0.1" t="tracktype" v="grade5"/>
				<select value="0.1" t="surface" v="unpaved"/>
				<select value="0.4" t="surface" v="compacted"/>
				<select value="0.1" t="surface" v="dirt"/>
				<select value="0.1" t="surface" v="earth"/>
				<select value="0.1" t="surface" v="gravel"/>
				<select value="0.4" t="surface" v="fine_gravel"/>
				<select value="0.1" t="surface" v="grass"/>
				<select value="0.1" t="surface" v="ground"/>
				<select value="0.1" t="surface" v="mud"/>
				<select value="0.1" t="surface" v="pebblestone"/>
				<select value="0.1" t="surface" v="sand"/>-->
				<select value="0.1" t="mtb:scale" v="1"/>
				<select value="0.1" t="mtb:scale" v="2"/>
				<select value="0.1" t="class:bicycle:mtb" v="-1"/>
<!--				<select value="0.6" t="surface" v="wood"/>-->
			</if>
			
			<select value="1.0" t="segregated" v="yes"/>
			<select value="1.0" t="bicycle" v="dismount"/>
			<select value="1.0" t="cycleway" v="sidepath"/>
			<select value="0.3" t="footway" v="sidewalk"/>
			<!-- Following lines: I would suggest to change
			the order, according to the following scheme:
			
			1.) First step: Downgrade all the ways that have a really bad
			surface (mud, grade5 etc). Those should be downgraded in any
			case (no matter if path/primary/cycleway/etc). Also, 
			"cobblestone" should already be downgraded here (otherwise,
			it would be ignored too often, for example because it is
			overruled by "bicycle=yes").
			
			2.) Upgrade cycle lanes and cycle tracks. Normally, those are
			paved (great), but they go along main roads, so I suggest a
			factor of 1.6/1.5 (which is already a big upgrade).
			
			3.) Assign a neutral factor to main roads. These are
			normally paved, but often, there is no tag for the surface:
			It makes no sense to upgrade only those main roads that just
			happen to be tagged with paved, asphalt, etc.
			
			4.) Upgrade all tracks, paths etc with a paved surface.
			Very important to do this before "bicycle=yes" (etc).
			Example: In parks, forests or fields, tracks are often
			tagged with bicycle=yes. But only a few tracks are tagged
			as paved. So it is important to check the "paved" first,
			so that paved / asphalt tracks gets a priority. Otherwise, 
			all tracks with bicycle=yes would be treated the same.
			
			5.) Only in "avoid unpaved" mode: Downgrade all paths and tracks
			now, even if they might later be marked bicycle=yes/official/etc.
			
			6.) Upgrade all ways that are tagged bicycle=yes/official etc.
			(this should only be done after the distinction between
			unpaved and paved/asphalt/etc )
			
			7.) Downgrade difficult surfaces such as sand, grass etc. 
			This is done late, because sand / grass are not necessarily
			very bad. A tag like "sand" is often put for compacted surfaces.
			So if a sand way is marked "bicycle=yes" before, it should be good.
			Accordingly, some tags that lead only to a slight upgrade are also
			put here.
			
			8.) Downgrade paths, tracks etc. If up to now, no surface or bicycle
			tag has been detected, the path has a certain risk of having a bad
			surface (we just do not know). To make sure, all smaller ways are
			downgraded now.-->

			<select value="0.1" t="sac_scale" v="mountain_hiking"/>
			<select value="0.9" t="class:bicycle:mtb" v="3"/>
			<select value="0.8" t="class:bicycle:mtb" v="2"/>
			<select value="0.7" t="class:bicycle:mtb" v="1"/>
			<select value="0.1" t="class:bicycle:mtb" v="-1"/>
			<select value="0.3" t="mtb:scale" v="1"/>
			<select value="0.2" t="mtb:scale" v="2"/>
			<select value="0.1" t="mtb:scale" v="3"/>
			<select value="0.05" t="mtb:scale" v="4"/>
			<select value="0.5" t="tracktype" v="grade5"/>
			<select value="0.2" t="smoothness" v="horrible"/>
			<select value="0.15" t="smoothness" v="very_horrible"/>
			<select value="0.1" t="smoothness" v="impassable"/>
			<select value="0.61" t="osmand_highway_integrity_brouting" v="5"/>
			<select value="0.4" t="osmand_highway_integrity_brouting" v="6"/>
			<select value="0.3" t="osmand_highway_integrity_brouting" v="7"/>
			<select value="0.2" t="osmand_highway_integrity_brouting" v="8"/>
			<select value="0.1" t="osmand_highway_integrity_brouting" v="9"/>
			<select value="0.05" t="osmand_highway_integrity_brouting" v="10"/>
			<select value="0.65" t="surface" v="cobblestone"/>

			<select value="1.5" t="cycleway" v="lane"/>
			<select value="1.5" t="cycleway" v="opposite_lane"/>
			<select value="1.1" t="cycleway" v="share_busway"/>
			<select value="1.6" t="cycleway" v="track"/>
			<select value="1.6" t="cycleway" v="opposite_track"/>
			<select value="0.9" t="cycleway" v="shared"/>
			<select value="0.9" t="cycleway" v="shared_lane"/>

			<select value="1.0" t="highway" v="primary"/>
			<select value="1.0" t="highway" v="secondary"/>
			<select value="1.0" t="highway" v="tertiary"/>
			<select value="1.0" t="highway" v="service"/>

			<select value="1.35" t="surface" v="asphalt"/>
			<select value="1.35" t="surface" v="paved"/>
			<select value="1.35" t="surface" v="concrete"/>
			<select value="1.30" t="surface" v="paving_stones"/>
			<select value="1.35" t="osmand_highway_integrity_brouting" v="0"/>
			<select value="1.3" t="osmand_highway_integrity_brouting" v="1"/>


			<if param="avoid_unpaved">
				<select value="0.3" t="highway" v="footway"/>
				<select value="0.3" t="highway" v="track"/>
				<select value="0.2" t="highway" v="path"/>
			</if>


			<select value="1.25" t="highway" v="cycleway"/>
			<!-- I have downgraded cycleways here and upgraded their
			kmh value at the same time. First, cycleways with
			asphalt yes should get a slight upgrade (there are also
			cycleways with compacted). Second, the end value for
			cycleways should be lower than the value for paths and
			footways with bicycle designated. Cycleways are often
			along main roads, whereas the attractive ways for
			bicycles (in parks or along rivers) are normally tagged
			bicycle=designated or yes. -->

			<select value="1.8" t="bicycle" v="official"/>
			<select value="1.8" t="bicycle" v="designated"/> 
			<select value="1.3" t="bicycle" v="yes"/>
			<!-- the value for bicycle=yes needs to be smaller than the
 			values for paved and asphalt. Reason: Often you have areas with
			several paths that are tagged bicycle yes, but only some of these
			paths are also tagged paved. In that case, the paved paths should
 			get a higher priority. -->

			<select value="1.1" t="surface" v="compacted"/>
			<select value="1.1" t="surface" v="fine_gravel"/>
			<select value="1.0" t="surface" v="wood"/>
			<select value="1.1" t="osmand_highway_integrity_brouting" v="2"/>
			<select value="0.92" t="osmand_highway_integrity_brouting" v="3"/>
			<select value="0.8" t="osmand_highway_integrity_brouting" v="4"/>
			<select value="1.3" t="smoothness" v="excellent"/>
			<select value="1.0" t="smoothness" v="good"/>
			<select value="0.9" t="smoothness" v="intermediate"/>
			<select value="1.3" t="tracktype" v="grade1"/>
			<select value="1.15" t="tracktype" v="grade2"/>
			<select value="1.0" t="tracktype" v="grade3"/>
			<select value="0.7" t="tracktype" v="grade4"/>
			<select value="0.9" t="surface" v="gravel"/>
			<select value="0.8" t="surface" v="unpaved"/>
			<select value="0.8" t="smoothness" v="bad"/>
			<select value="0.50" t="surface" v="dirt"/>
			<select value="0.45" t="surface" v="sand"/>
			<select value="0.75" t="surface" v="earth"/>
			<select value="0.65" t="surface" v="grass"/>
			<select value="0.75" t="surface" v="ground"/>
			<select value="0.5" t="surface" v="mud"/>
			<select value="0.5" t="smoothness" v="very_bad"/>
			<select value="1.2" t="route_bicycle"/> 
			<!-- If a part of a bicycle route has a surface tag, it will have
			been upgraded or downgraded up to this point. The value
			1.2 here is applied to all bicycle routes with no surface tag. -->
			<select value="1.25" t="highway" v="residential"/>
			<!-- New: The factor for residential is better placed here, so that we can
			first downgrade all residential that are tagged with a bad surface.
			Overpass shows many cases of residential with sand, unpaved, etc.
			And: Even in big cities, the surface of residential is often not tagged
			at all. So residential roads that have no surface tag, now get a slightly
			lower value than those with asphalt or paved. The value of 1.25 is
			right because it should be close to the 1.35 for paved. Reason: Many 
			residential roads still have no surface tag at all. Most of them are 
			asphalt (but we do not know for sure). So, they should be downgraded
			a bit (to take into account that they might be unpaved), but not too much
			(because most of them will still be paved). -->

			<select value="1.25" t="highway" v="living_street"/>
			<select value="1.25" t="highway" v="unclassified"/>
			<select value="1.0" t="highway" v="road"/>
			<select value="0.75" t="highway" v="footway"/>
			<select value="0.7" t="highway" v="track"/>
			<select value="0.6" t="highway" v="path"/>

			<if param="driving_style_speed">
				<select value="1.4" t="highway" v="motorway"/>
				<select value="1.3" t="highway" v="motorway_link"/>
				<select value="1.4" t="highway" v="trunk"/>
				<select value="1.3" t="highway" v="trunk_link"/>
			</if>
			<select value="0.5" t="highway" v="motorway"/>
			<select value="0.5" t="highway" v="motorway_link"/>
			<select value="0.5" t="highway" v="trunk"/>
			<select value="0.5" t="highway" v="trunk_link"/>

		</way>

		<point attribute="obstacle_time">
			<select value="10" t="barrier" v="cycle_barrier"/>
			<select value="15"  t="barrier" v="gate"/>
			<select value="20"  t="barrier" v="lift_gate"/>
			<select value="20"  t="barrier" v="swing_gate"/>
			<select value="15"  t="barrier" v="log"/>
			<select value="5"  t="barrier"/>
			<select value="30" t="highway" v="traffic_signals"/>
			<select value="10" t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="20" t="crossing" v="traffic_signals"/>
			<select value="15" t="highway" v="stop"/>
			<select value="7"  t="highway" v="give_way"/>
			<select value="200" t="ford"/>
			<select value="25" t="railway" v="crossing"/>
			<select value="25" t="railway" v="level_crossing"/>
		</point>

		<point attribute="obstacle">
			<if param="avoid_borders">
				<select value="-1" t="barrier" v="border_control"/>
			</if>
			<if param="driving_style_safety">
				<select value="16" t="crossing" v="traffic_signals"/>
				<select value="16" t="crossing" v="island;traffic_signals"/>
				<select value="27" t="highway" v="traffic_signals"/>
			</if>
			<!-- Lines above: These values are only a workaround. They apply until 
			one issue is resolved: The triple counting of traffic lights at main
			junctions. This can hopefully be resolved within map rendering.
			Any combination of values that we put here (into the routing.xml)
			leads to routing errors. The above is only a compromise to minimize
			those errors.-->
			
			<select value="9" t="crossing" v="traffic_signals"/>
			<select value="1" t="crossing" v="uncontrolled"/>
			<select value="3" t="crossing" v="unmarked"/>
			<select value="1" t="crossing" v="island"/>
			<!-- Lines above: These values should not get too high, because
			in maps, crossing=island is often combined with either two nodes
			"crossing=unmarked" or two nodes "crossing=traffic_signals".
			So, often you get triple counting here as well. And the crossing
			of a main road very often cannot get a penalty at all: Often,
			a crossing is not marked as a crossing and this makes it impossible
			to apply any penalty. So it would make no sense to just apply a high
			penalty on some cases. -->
			<select value="5" t="crossing" v="island;traffic_signals"/>
			<select value="13" t="highway" v="traffic_signals"/>
			<select value="55"  t="highway" v="steps"/>
			<select value="15"  t="bicycle" v="dismount"/>
			<select value="240" t="route" v="ferry"/>
			<select value="200" t="ford" v="yes"/>
			<select value="-1" t="bicycle" v="no"/>
			<select value="1"  t="bicycle" v="yes"/>
			<select value="1"  t="bicycle" v="permissive"/>
			<select value="1"  t="bicycle" v="designated"/>
			<select value="1"  t="bicycle" v="official"/>

			<select value="1" t="vehicle" v="no"/>
			<select value="1" t="vehicle" v="agricultural"/>
			<select value="1" t="vehicle" v="forestry"/>
			<select value="1"  t="vehicle" v="yes"/>
			<select value="1"  t="vehicle" v="permissive"/>
			<select value="1"  t="vehicle" v="designated"/>

			<select value="-1" t="access" v="no"/>
			<select value="1" t="access" v="agricultural"/>
			<select value="1" t="access" v="forestry"/>
			<select value="1"  t="access" v="yes"/>
			<select value="1"  t="access" v="permissive"/>

			<select value="-1" t="crossing" v="no"/>

		</point>

		<way attribute="penalty_transition">
			<if param="driving_style_balance">
				<select value="1" t="highway" v="trunk"/>
				<select value="2" t="highway" v="trunk_link"/>
				<select value="3" t="highway" v="primary"/>
				<select value="4" t="highway" v="primary_link"/>
				<select value="6" t="highway" v="secondary"/>
				<select value="7" t="highway" v="secondary_link"/>
				<select value="20" t="highway" v="tertiary"/>
				<select value="26" t="highway" v="tertiary_link"/>
				<select value="50" t="highway" v="residential"/>
				<select value="50" t="highway" v="living_street"/>
				<select value="52" t="highway" v="service"/>
				<select value="58" t="highway" v="track"/>
				<select value="60" t="highway" v="footway"/>
				<select value="65" t="highway" v="path"/>
				<select value="70"/>
			</if>
			<if param="driving_style_speed">
				<select value="3" t="highway" v="trunk"/>
				<select value="4" t="highway" v="trunk_link"/>
				<select value="7" t="highway" v="primary"/>
				<select value="8" t="highway" v="primary_link"/>
				<select value="10" t="highway" v="secondary"/>
				<select value="12" t="highway" v="secondary_link"/>
				<select value="80" t="highway" v="tertiary"/>
				<select value="51" t="highway" v="tertiary_link"/>
				<select value="52" t="highway" v="residential"/>
				<select value="52" t="highway" v="living_street"/>
				<select value="85" t="highway" v="service"/>
				<select value="86" t="highway" v="track"/>
				<select value="87" t="highway" v="footway"/>
				<select value="87" t="highway" v="path"/>
				<select value="90"/>
			</if>
		</way>

	</routingProfile>

	<routingProfile name="pedestrian" baseProfile="pedestrian" restrictionsAware="false" minDefaultSpeed="3" maxDefaultSpeed="5"
			leftTurn="0" rightTurn="0" followSpeedLimitations="false" onewayAware="false">

		<attribute name="heuristicCoefficient" value="1.2" />
		<!-- NEW ROUTING API -->
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_motorway" name="Avoid motorways" description="Avoid motorways" type="boolean"/>
		<parameter id="avoid_stairs" name="Avoid stairs" description="Avoid stairs" type="boolean"/>
		<parameter id="height_obstacles" name="Use elevation data" description="Use terrain elevation data provided by SRTM, ASTER and EU-DEM" type="boolean"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>

			<if param="avoid_motorway">
				<select value="-1" t="highway" v="motorway"/>
				<select value="-1" t="highway" v="motorway_link"/>
				<select value="-1" t="highway" v="trunk"/>
				<select value="-1" t="highway" v="trunk_link"/>
			</if>
			<select value="-1" t="highway" v="steps">
				<if param="avoid_stairs"/>
			</select>

			<select value="-1" t="route" v="ferry">
				<if param="avoid_ferries"/>
			</select>
			<select value="-1" t="foot" v="no"/>
			<select value="1"  t="foot" v="yes"/>
			<select value="1"  t="foot" v="permissive"/>
			<select value="1"  t="foot" v="designated"/>
			<select value="1"  t="foot" v="destination"/>
			<select value="1"  t="foot" v="official"/>
			<select value="1"  t="foot" v="use_sidepath"/>

			<select value="-1" t="access" v="no"/>
			<select value="-1" t="access" v="private"/>
			<select value="1"  t="access" v="yes"/>
			<select value="1"  t="access" v="permissive"/>

			<select value="1" t="highway" v="motorway"/>
			<select value="1" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="cycleway"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="path"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="highway" v="pedestrian"/>
			<select value="1" t="highway" v="footway"/>
			<select value="1" t="highway" v="platform"/>
			<select value="1" t="railway" v="platform"/>
			<select value="1" t="public_transport" v="platform"/>
			<select value="1" t="highway" v="bridleway"/>
			<select value="1" t="highway" v="steps"/>
			<select value="1" t="route" v="ferry"/>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
		</way>


		<way attribute="speed" type="speed">
			<select value="4" t="highway" v="steps"/>
			<select value="5"/>
		</way>

		<way attribute="obstacle_srtm_alt_speed">
			<if param="height_obstacles">
				<gt value1="-60" value2=":incline">
					<select value="35"/>
				</gt>
				<gt value1="-25" value2=":incline">
					<select value="30"/>
				</gt>
				<gt value1="-17" value2=":incline">
					<select value="17"/>
				</gt>
				<gt value1="-9" value2=":incline">
					<select value="5"/>
				</gt>
				<gt value1="-3" value2=":incline">
					<select value="1"/>
				</gt>
				<gt value1="3" value2=":incline">
					<select value="1"/>
				</gt>
				<gt value1="7" value2=":incline">
					<select value="4"/>
				</gt>
				<gt value1="13" value2=":incline">
					<select value="8"/>
				</gt>
				<gt value1="25" value2=":incline">
					<select value="10"/>
				</gt>
				<select value="15"/>
			</if>
		</way>

		<way attribute="priority">
			<!-- Additional tags -->
			<select value="0.05" t="foot" v="private"/>
			<select value="0.05" t="foot" v="destination"/>

			<!-- Q? access=destination should not be used foot or what is the proposed scheme
			http://www.openstreetmap.org/way/173188624#map=18/39.56805/2.64846
			should be 
			<select value="0.05" t="access" v="private"/>
			<select value="0.05" t="access" v="destination"/> -->

			<select value="1.2" t="sidewalk" v="yes"/>
			<select value="0.9" t="sidewalk" v="no"/>

			<select value="0.1" t="foot" v="use_sidepath"/>

			<!-- object tags -->
			<select value="0.7" t="highway" v="motorway"/>
			<select value="0.7" t="highway" v="motorway_link"/>
			<select value="0.7" t="highway" v="trunk"/>
			<select value="0.7" t="highway" v="trunk_link"/>
			<select value="0.8" t="highway" v="bridleway"/>
			<select value="0.9" t="highway" v="service"/>
			<select value="0.9" t="highway" v="primary"/>
			<select value="0.9" t="highway" v="primary_link"/>
			<select value="0.9" t="highway" v="secondary"/>
			<select value="1"   t="route"   v="ferry"/>
			<select value="1.2" t="highway" v="steps"/>
			<select value="1.2" t="highway" v="living_street"/>
			<select value="1.2" t="highway" v="pedestrian"/>
			<select value="1.2" t="highway" v="footway"/>

			<select value="1"/>
		</way>

		<point attribute="obstacle_time">
			<select value="5" t="highway" v="traffic_signals"/>
			<select value="10" t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="30" t="crossing" v="traffic_signals"/>
			<select value="5" t="highway" v="crossing"/>
			<select value="5" t="ford" />
			<select value="5" t="railway" v="crossing" />
			<select value="5" t="railway" v="level_crossing"/>
		</point>

		<point attribute="obstacle">
			<select value="-1" t="foot" v="no"/>
			<select value="-1"  t="foot" v="private"/>
			<select value="120"  t="foot" v="destination"/>
			<select value="0"  t="foot" v="yes"/>
			<select value="0"  t="foot" v="permissive"/>
			<select value="0"  t="foot" v="designated"/>
			<select value="0"  t="foot" v="official"/>

			<select value="-1" t="access" v="no"/>
			<select value="-1"  t="access" v="private"/>
			<select value="120"  t="access" v="destination"/>

			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>

		</point>
	</routingProfile>
	<routingProfile name="geocoding" baseProfile="car" restrictionsAware="true" minDefaultSpeed="10.0" maxDefaultSpeed="10.0">
		<way attribute="access">
			<select value="1" t="highway" v="motorway"/>
			<select value="1" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="highway" v="pedestrian"/>
			<select value="1" t="route" v="ferry"/>
			<select value="1" t="route" v="shuttle_train"/>
			<select value="-1"/>
		</way>
	</routingProfile>

	<routingProfile name="boat" restrictionsAware="true" minDefaultSpeed="5.0" maxDefaultSpeed="20.0" onewayAware="true">
		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="access" v="no"/>
			<select value="1"  t="access" v="yes"/>
			<select value="-1" t="access" v="private"/>
			<select value="-1" t="waterway" v="dam"/>
			<select value="-1" t="waterway" v="weir"/>
			<select value="-1" t="waterway" v="waterfall"/>
			<select value="1"  t="access" v="permissive"/>
			<select value="1"  t="access" v="destination"/>
			<select value="1"  t="waterway" v="river"/>
			<select value="1"  t="waterway" v="canal"/>

			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
		</way>

		<way attribute="speed" type="speed">
			<select value="10"  t="waterway" v="river"/>
			<select value="10"  t="waterway" v="canal"/>
		</way>

		<way attribute="priority">
			<select value="1"  t="waterway" v="river"/>
			<select value="1"  t="waterway" v="canal"/>
			<select value="0.7"/>
		</way>

		<point attribute="obstacle">
			<select value="-1" t="boat" v="no"/>
			<select value="-1" t="access" v="no"/>
			<select value="-1"  t="access" v="private"/>
			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			<select value="0"  t="access" v="customers"/>
		</point>
	</routingProfile>

</osmand_routing_config>

Offline

#6215 2018-01-22 12:28:39

Глеб
Member
From: Kazan, RU-TA
Registered: 2012-03-03
Posts: 189

Re: OsmAnd - хотелки и предложения по улучшению

Извините, может кто-нибудь показать, как выглядит программа на Android Wear?

Offline

#6216 2018-02-01 15:20:42

LLlypuk82
Member
From: Витебск (Беларусь)
Registered: 2012-12-23
Posts: 2,373
Website

Re: OsmAnd - хотелки и предложения по улучшению

Сейчас при использовании функции «переместить курсор», после нажатия «применить» этот самый курсор исчезает...
По логике, если мне надо его двигать в интересующую точку, то значит он должен указывать на неё и выдавать какую-то информацию+позволять осуществить какие-то манипуляции (из выпадающего меню).
Версия ночная, сегодняшняя.

Offline

#6217 2018-02-01 17:30:27

LLlypuk82
Member
From: Витебск (Беларусь)
Registered: 2012-12-23
Posts: 2,373
Website

Re: OsmAnd - хотелки и предложения по улучшению

Похоже, что »здесь« перепутана «шильда», потому что показывает М5.

Offline

#6218 2018-02-01 17:36:48

freeExec
Moderator
From: Ульяновск,Модератор всех слоёв
Registered: 2012-07-31
Posts: 7,566

Re: OsmAnd - хотелки и предложения по улучшению

Шиль на мапнике М4, а вот опять у вас тут сервис.

Offline

#6219 2018-02-01 17:39:34

LLlypuk82
Member
From: Витебск (Беларусь)
Registered: 2012-12-23
Posts: 2,373
Website

Re: OsmAnd - хотелки и предложения по улучшению

freeExec wrote:

на мапнике М4

Ну а тема-то про OsmAnd
0_16715f_7a28f1c8_orig.png

Кстати, на стиле LightRS показывает правильно, на других — глюк.

Last edited by LLlypuk82 (2018-02-01 17:58:42)

Offline

#6220 2018-02-01 20:48:30

literan
Member
Registered: 2012-11-06
Posts: 2,772
Website

Re: OsmAnd - хотелки и предложения по улучшению

LLlypuk82 wrote:

Похоже, что »здесь« перепутана «шильда», потому что показывает М5.

Это у вас в данных перепутано: https://www.openstreetmap.org/relation/165064

Логично, что ОсмАнд показывает из отношения route

Offline

#6221 2018-02-01 21:03:05

LLlypuk82
Member
From: Витебск (Беларусь)
Registered: 2012-12-23
Posts: 2,373
Website

Re: OsmAnd - хотелки и предложения по улучшению

Вот оно чё)) Спасибо, подумать не мог такого. Будем поправлять (а виновные будут наказаны big_smile ).

Offline

#6222 2018-02-05 16:57:11

RomeoGolf
Member
Registered: 2015-05-07
Posts: 21

Re: OsmAnd - хотелки и предложения по улучшению

Я дико извиняюсь, но только сейчас обнаружил, что не могу найти Distance calculator & planning tool, еще осенью пользовался.
Или эта фишка теперь ограничена версией андроида?
Обидно! Чем теперь можно прогуляться по имеющемуся записанному треку по точкам? Кто-нибудь может подсказать?

Offline

#6223 2018-02-05 19:54:35

coolkaas
Member
From: RU, Penza
Registered: 2009-05-28
Posts: 2,254

Re: OsmAnd - хотелки и предложения по улучшению

Же можно анализировать трек, чего ещё?)) и точки тыкать, и добавлять/удалять. Там всё это совмещено теперь.

Offline

#6224 2018-02-06 17:26:51

RomeoGolf
Member
Registered: 2015-05-07
Posts: 21

Re: OsmAnd - хотелки и предложения по улучшению

М-да... Знать бы еще, что теперь оно туда уехало... Разобрался, но как-то оно менее очевидно стало. Одно только "редактирование", спрятанное под кнопкой "интервал разбиения" чего стоит. Хотя возможностей, пожалуй, даже побольше, чем было. А самое странное - перемещение точек. Не точку надо двигать, а карту вокруг нее.

Offline

#6225 2018-03-24 21:13:47

LLlypuk82
Member
From: Витебск (Беларусь)
Registered: 2012-12-23
Posts: 2,373
Website

Re: OsmAnd - хотелки и предложения по улучшению

Просьба добавить поддержку (для поиска) альтернативных названий с языковым префиксом (alt_name:ru и т. д.) и, если ещё не поддерживается — просто alt_name.
Зачастую у НП или рек имеется несколько разных названий в пределах одного и того же языка (и даже нескольких). В Беларуси есть вариации на белорусском и русском языках (по 2 названия на каждом, например).

Offline

Board footer

Powered by FluxBB