Thanks for your input GRi,
About 1b: I don’t know if the Edge has night mode display, you can try if this renders better in the full EU version
2a It’s a Garmin bug that they put the navigation line behind the road lines. In all the later units the navigation is always on top and big. You can’t change it, only making the lines much thinner, but I won’t make another typ file. You can edit the typ files and make a custom one that suits your needs.
Yes, there is no point about a typ file, i have my own typ file for every map I use. But hopefully you will continue to supply the OFM Light here as you do now, since that’s the best performing map at the Edge 705.
GRi, since you are living in the NL’s (I suppose), there will be still a light version of the benelux available at openfietsmap.nl
Because the NL’s is a very heavily mapped country you will notice the differences in performance.
For other regions in Europe I’m not so sure if the full EU version is really so much slower because it’s not so well mapped. So I’m still not convinced if a world wide lite version next to a full version is making sense. Other opinions are welcome.
Yes, I’m living in the nl. And cycling in Europe. Germany is more interesting for me than Belgium or Luxembourg.
Is it more work for mapgeneration when the area gets bigger? I can imagine that processes run longer, and maybe you need more powerfull hardware?
Hi, I apologize if this has been requested in the past but I was not able to find this info: where is it possible to know which version of mkgmap - and maybe which command line params - are used to build the maps?
It would be nice to know this to be aware of which new functionality are available… in the past I tried the maps there but since the mkgmap version used was not that up to date I was missing the address search functionality so I switched to build maps myself using geofabick pbf, spltter and the latest mkgmap… and I’m still doing that! But I would swicth back to lambertus maps if I knew the way the map is build and find out it is matching my needs.
Many thanks!
gspeed
Hello gspeed,
The mkgmap version is in the licence file that you see in the list of downloadable files, as indicated by the description. The params have been discussed here: http://forum.openstreetmap.org/viewtopic.php?id=13257&p=5
See http://osm.pleiades.uni-wuppertal.de/garmin/generic/07-04-2013/d0a4cfbbae3118e554bea4f668265ef6/63240000_license.txt
Map created with mkgmap-r2544 (which includes housenumber search)
perfect - thanks!
hey, I tried myself but: http://osm2.pleiades.uni-wuppertal.de/garmin/generic/07-04-2013/98f36cdf7e3fbffdb0dfe9893600cd2b/63240000_license.txt
the vesion is “Map created with mkgmap-r2309” - that’s pretty old, how did you get 2544?
The tiles are generated on osm.pleiades.uni-wuppertal.de and then copied to osm2. The Mkgamp on osm2 is only used to create the gmapsupp and -I think- not related to recent improvements in the search capabilities as those concern the indexes in separate tiles. But I could be mistaken ofcourse.
The commandline parameters have been posted at various places in this topic
Did you download a “custom” map (not one of the drop downlist)?
Then maybe Lambertus should have a look here and update his scripts to use the same mkgmap recent version.
I think it is better always use the same mkgmap version?
ok - so I agree with ligfietser, for custom maps the final behavior/features might not be aligned to the pre-created map and this can create confusion (@ligfietser yes, it was a custom map)
Regarding the command line, right - but it is quite time consuming to get the full picture and you mgith always miss a latest change, it would be nice if the current command lines will be documented somewhere in the wiki pages!
Nevertheless… thanks for all what you provide!
gspeed
Possibly, but it has almost always been the case that the Mkgmap version on osm2 is lagging behind. Differences should only have effects when it concerns gmapsupp creation. Anyway, I have a map from osm2 on my GPS and address search works fine.
Better update it because the license txt is old: 
Map data licenced under Creative Commons Attribution ShareAlike 2.0
In the latest mkgmap version this is changed,
see http://www.mail-archive.com/mkgmap-dev@lists.mkgmap.org.uk/msg15446.html
Thanks for this service - I will definitely be sending you a donation! Just got back from a moto ride from Canada to Costa Rica. Before I left with my friends we decided each to get different set of maps so that in that we could compare. One of us got the Garmin maps, one of us got a set made by a Mexican provider, and one of us took advantage of your service. We all ended up using your maps, as they were by far the best!
Now, I am heading to ride in Europe in the next couple of weeks, so I downloaded from Italy to Eastern Europe. I took note of the issue with downloading different maps sets and took your advice to load JaVaWa GMTK - and gave the first down load a different name. Still when I loaded the second set it overwrote the first - and then when loaded into Map Source crashed the program everytime I tried to load the maps. I removed it with GMTK and reloaded the original …and it seems to be working again. But now I am confused as to what you mean by changing the ID - which I thought I had done…but whatever change I made - seems to result in Map Source crashing…
What category should I modify - Family ID, Name on Computer, Name on Device, Folder name…?
THanks
If you already have one OSM Generic routable mapset installed, you need to run Javawa GMTK first and modify the Family ID, Name on Computer and Folder Name first before installing a second mapset. Keep Mapsource (or Basecamp) closed when you do this and it should work. When you run the installer of the 2nd mapset, the installer notice that the mapset is already installed, click OK to proceed.
After the 2nd installation, run Javawa GMTK again to check if the second mapset is installed without problems and to modify the latest mapset name and ID so that you can install more OSM mapsets in the future.
Hi All,
First of all thanks for the great service of garmin.openstreetmap.nl
I am not sure if it was mentioned before, but I want to attend everybody on the programme: GMap tool (www.gmaptool.eu/en), which allows you to change “map set Names” on the .img files directly.
By this method you can just 1) download the .zip file (containing gmapsupp.img) from garmin.openstreetmap.nl. 2) Copy the unzipped gmapsupp.img to your device and 3) change the map set name with Gmap tool to the desired name to be shown on your device. So no need for Basecamp.
Hello everyone,
My first post, please be gentle 
I need maps for a motorcycle GPS Zumo 660LM. It is for a friend of mine but he needs maps of Russia and India. GPS itself was ordered with maps of Europe. Am I safe to assume that if I download the ZIP (img) maps of India and Russia on a SD card, he would be successful in navigating though both those countries on his Zumo? The GPS is on order and I am getting prepared so any help would be greatly appreciated. TIA
Splitter question:
I have an old (but waterproof) Garmin GPS V that has served me well on my motorbike. I want to upgrade it with a OSM map, as I have had great value of Lambertus’ service on my Garmin nüvi 30.
The GPS V has *very *limited capacity, so I guess that I will have to use the Splitter program - but is this possible with Lambertus’ maps? As I understand, the tiles on http://garmin.openstreetmap.nl are the result of Splitter’s work - so if I want even smaller tiles, I have to start over by myself? Is this correct?
In any case, advise on how to produce the exact same maps as Lambertus’ - just with smaller tiles - is appreciated.
BR,
Jakob
Hi Hack,
For ease of use I suggest you build a custom map on the site, using the manual tile selection option and also make sure you choose the 2nd option “testing new style”. This will give you a single file to download, gmapsupp.img, which you put in the Garmin folder on the micro SD card. If the Russia maps already on the GPS overlap they will need to be disabled.
I have a Zumo 660 and OSM maps work well.
Cheers,
Peter.
Per Beddist’s suggestion, I’m reposting a question here about using Lambertus’s Garmin maps on my Garmin Quest. Here’s my orginal post:
So it was suggested that I try searching for some of the same addresses on the OSM site, which I did, and I found them… well, at least last Friday I did. The OSM site map doesn’t seem to want to find specific addresses today. (Is that a common problem on OSM?)
Anyway, I’d like to know this: If I can find a specific address on the OSM site map, should I be able to find them in MapSource (and hopefully on my GPS) using maps downloaded from garmin.openstreetmap.nl? Just trying to determine if I can extend the life of my old Quest (which works fine except for the old Garmin maps).
Thank you!