You are not logged in.

#1 2021-10-15 19:55:04

VorpalSword
New Member
Registered: 2021-10-15
Posts: 2

Adding missing open data source for Örebro Komun?

Hi,

I'm not sure about the process, but I noticed that Örebo Kommun has open (CC-0, so it should be allowed as far as I can tell) data available:
https://www.orebro.se/fordjupning/fordj … odata.html

As a test I successfully added the WMS endpoint into JOSM. (what you need to use is http://karta2.orebro.se/mycartaserver/opendata.wms).

However, before I use this data source and also before I try to add it to add this to https://josm.openstreetmap.de/wiki/Maps/Sweden I would like some guidance:

1. Make sure that I understand the license compatibility correctly.
2. Technical guidance on the process of adding the data source. There are complications such as listing supported map projections for WMS source. How do I figure that out?
3. Also, there are several layers available. Several seem of interest to OpenStreetMap such as "vägtrafiknät" (lines indicating car roads), "lekplatser" (playgrounds) and "parkytor" (park areas). However, some, such as solar panel installation data and noise measurements do not seem to be of any interest to OpenStreetMap. Should a wms_endpoint be added so the user can select which layers to use, or should each of the layers of interest be added separately?
4. There are also several vector layers available (see http://data.karta.orebro.se/). There is some overlap between WMS layers and vector layers, but neither is a superset of the other. Can we even use these vector layers with JOSM?

Offline

#2 2021-10-21 14:06:22

NKA
Member
From: Norway
Registered: 2016-11-20
Posts: 159
Website

Re: Adding missing open data source for Örebro Komun?

This data is licensed as CC0 and therefore available to use for OpenStreetMap. I have added the two WMS endpoints to the standard imagery list in JOSM, so they are now available in JOSM when you pan over Örebro.

The data itself is available as geojson output from http://data.karta.orebro.se/. Save it to a .geojson file and open the file in JOSM. For example you could import trees in Örebro (after discussing it with the community) through the api at http://data.karta.orebro.se/opendataapi … s/6f6bf4af.

Offline

#3 2021-10-21 21:23:42

Msiipola
Member
Registered: 2021-07-08
Posts: 37

Re: Adding missing open data source for Örebro Komun?

Om du tänker uppdatera alla vägar i kommunen bör du följa instruktioner här: https://wiki.openstreetmap.org/wiki/Imp … guidelines

Offline

#4 2021-11-01 14:08:32

VorpalSword
New Member
Registered: 2021-10-15
Posts: 2

Re: Adding missing open data source for Örebro Komun?

Tack för hjälpen med detta, och tack för infon.

Jag har inte tänkt uppdatera alla vägar, har tyvärr inte tid till ett sådant projekt.

Offline

Board footer

Powered by FluxBB